Carbon-free hoses
Hoses used for water-cooled cables, sometimes called as water and electricity hose, is highly used in melting and casting industry. High demanded quality of these hoses and costumer complaints about impairment, lead us to order them directly to the famous European producers. Below picture illustrates material of the hoses in detail:
For better protection against melt splash, tensions and rubbing according to continuing movement, some particular protections can be applied, specially for water-cooled cables of the arc furnaces. For more info on this please refer to water-cooled cables of arc furnaces (cable protection subsection) and water-cooled cables of induction furnaces (cable protection against flame)
Below table presents dimensional and technical properties of standard hoses used by Araz Trans Co. for water-cooled cables:
| Unit
length mass (Kg/meter) |
Max.
pressure (tearing threshold) |
Operational
pressure (bar) |
Max.
allowed bending diameter (mm) |
Outer
diameter (mm) |
Inner
diameter (mm) |
Nominal
size
|
|---|---|---|---|---|---|---|
| 0.34 | 48 | 16 | 104 | 22 (±1) | 13 | (1/2)ʺ |
| 0.63 | 152 | 31 (±1) | 19 | (3/4)ʺ | ||
| 0.78 | 200 | 37 (±1) | 25 | 1ʺ | ||
| 1.09 | 256 | 45 (±1.2) | 32 | 1,(1/4)ʺ | ||
| 1.26 | 304 | 51 (±1.2) | 38 | 1,(1/2)ʺ | ||
| 1.35 | 360 | 58 (±1.2) | 45 | 1,(3/4)ʺ | ||
| 1.66 | 408 | 65 (±1.2) | 51 | 2ʺ | ||
| 2.38 | 504 | 79 (±1.2) | 63 | 2,(1/2)ʺ | ||
| 2.82 | 608 | 92 (±1.2) | 76 | 3ʺ | ||
| 4.67 | 816 | 122 (±1.2) | 102 | 4ʺ | ||
| 8.23 | 1016 | 155 (±1) | 127 | 5ʺ | ||
| 11.17 | 1216 | 184 (±1.2) | 152 | 6ʺ |
All the hoses for particular use in water-cooled cables with above-mentioned or arbitrary sizes would bu available by us.